30mm Metal LED Tact Switches with IP67 Rating
The 30mm Metal LED Tact Switches series is an internal waterproof light-touch switch. Its short size is suitable for use in narrow spaces. It has a single-color/two-color/three-color common pole with light function, and can be wired with plugs. This momentory Tact Switch’s operating ambient temperature range is from -20°C to 85°C, and with IP67 rating which suitable for a variety of different conditions.
The distinctive feature is the double action of the double throw switch; It will actuates when press mid-travel and , then continue pressing for another actuation at full travel. This Metal Tact Switches also offer a nice tactile response which allow this series Tactile Push Button Switchesto be used across a wide variety of applications and operating conditions. The applications is Medical equipment, Industrial control instruments and Computer.
SPECIFICATIONS
Panel Thickness: Ø30.20mm
Function:Momentary
Contact Rating: 50mA @ 12VDC.
Mechanical Life: 200,000 cycles
Contact Resistance: 50 mΩ max.
Insulation Resistance: 100MΩ min.
Operating Temperature: -20°C to 85°C
Electrical Life: 50,000 cycles make-and-break cycles.
Torque: 1~3Nm
Travel: About 0.3mm
Operation Pressure: About 1.5N
Dielectric Strength: 500 Vrms @sea level.
Ingress Protection: IP67
MATERIALS
BUSHING : Stainless Steel / Nickel plated brass / Aluminum alloy
BASE : PBT, PC
ACTUATOR : PC ; Stainless Steel / Nickel plated brass / Aluminum alloy
INNER ASSEMBLY : POM / PA66.
SPRING : Spring steel.
SEALING : Sillicone.
O-Ring : Sillicone
TERMINAL : Brass,with silver or gold plated.
HEX NUT : Nickel plated brass
Led: 1.8V/3V/6V/12V/24V/36V/48V/110V/220V
ILLUMINATION BASE RATlNG：
Red， Yellow and Orange：20mA 1.8V;
Blue, Green and White：20mA 2.8V
Beads Color：R/U/G/Y/0/W/RGB
Our Advantages
From the purchase of raw materials to the finished product, all production process (product development/plating/mold and equipment processing/ metalpressing/ plasticinjection/semi-automatic and fully automated equipment assembly, etc.) are completed in the factory. Our metal pressing and plastic injection own the advantages of 100% self-made mold, from a single form to the various forms of application. And we continuously keep innovation and enhance the technology in order to collaborate with our customers to design the most sophisticated products. Yeswitch Electronics Co., Ltd., whether in production base or in quality assurance department in the head office, have professional equipment and technical personnel. In addition to the annual new product development, product improvement and testing are performed as annual plan to ensure that listed products maintain in best quality. Therefore, our long-term customers/partners, get the best quality of the switches.
Order Procedure
Production Procedure
Contact Now
