Waterproof Rocker Switch
Waterproof ship switch is also called waterproof rocker switch.
Its wiring pin has two terminal blocks or three terminal blocks. Taiwan Yeswitch Electronics Co,.ltd. takes you to understand the difference between the ship type switch, the rocker switch, the power switch, the IO switch, the two feet and the three feet:
1.Two-Pins waterproof boat switch, rocker switch
The boat switch is turned off and on as the other switches.
Things to be aware of here: Never connect one of his two terminals to the negative pole, which will cause a serious short circuit.
Here is the correct wiring method:
The positive pole of the power supply can enter any terminal of the waterproof ship type switch, and then the other terminal of the power supply can be connected to the load and then returned to the negative pole of the power supply.
2. Three-Pins Rocker switch, waterproof rocker switch
There are three terminals, generally there will be no indicator light, but with a normally open contact and a normally closed contact, with a common point in the middle and a normally open and normally closed on both sides.
When making a transfer switch, the middle is the moving contact, and the two sides are fixed contacts;
When making a single switch, you can connect only the middle column and any column on the side.
Learn more about waterproof rocker switch, mini waterproof rocker switch, please visit the official website of www.yeswitches.com
